Guide · Make
How do I make a print-ready file?
Short answer
A print-ready file is the final size plus 0.125 in bleed on every side, with text kept 0.125 in inside the trim, images at 300 DPI, colours in CMYK, fonts outlined or embedded, saved as a high-resolution PDF.
The checklist
Run through this before you send artwork to any printer.
- Size: set the document to the finished size
- Bleed: extend backgrounds and images 0.125 in (3 mm) past every edge
- Safe zone: keep text and logos 0.125 in inside the trim
- Resolution: 300 DPI at final size for photos (large-format can be lower, see below)
- Colour: CMYK, not RGB. Bright RGB greens and blues will shift
- Fonts: outline them or embed them in the PDF
- Format: high-resolution PDF (PDF/X-1a or PDF/X-4 if your software offers it)
Large format is different
Banners and backdrops are viewed from further away, so they don't need 300 DPI at full size. 100–150 DPI at final size is typical for banners viewed from several feet, and vector artwork is always ideal. Check with us if you're unsure.
Don't have print-ready files?
Send what you have. Every BOLO order includes a digital proof before anything is printed, and our design team can build print-ready files for you.
Questions
What is bleed in printing?
Extra image area, usually 0.125 in, that extends past the edge of the final piece so there's no white sliver after cutting.
Should I send RGB or CMYK?
CMYK. Printers print in CMYK, so RGB files get converted and some bright colours shift.
Is 72 DPI OK for print?
No. 72 DPI is screen resolution. Small printed pieces need around 300 DPI at final size.
Ready when you are